In the search bar, type: Tuya Smart or Tuya – Smart Life, Smart Living.
3. Select the Correct App
Look for the app named Tuya Smart with the recognizable icon (usually featuring a smart home symbol or the official Tuya logo).
4. Tap “Install” or “Get”
Tap the Install button if you are using the Google Play Store. Tap the Get button if you are using the App Store (you may need to confirm with your password, Touch ID, or Face ID).
5. Wait for the Download and Installation
The application will automatically download to your phone.
6. Open the App
Tap the Open button after installation is finished, or locate the app icon on your phone’s home screen.
Important Notes After Downloading:
• Sign Up/Log In: You will need to create a new account (using your email or phone number) or log in if you already have one.
• Add Devices: After logging in, you can start adding and controlling your smart devices (like lights, cameras, etc.).
• Control from Anywhere: Use your mobile app or voice assistant.
How to Add and Connect Smart Devices to the Tuya App
The process for pairing a smart device generally follows these unified steps:
1. Prepare the Device and the App
• Check Wi-Fi Network: Your phone must be connected to a 2.4 GHz Wi-Fi network. Most Tuya devices require this frequency, not 5 GHz.
• Enable Bluetooth: For many newer devices, turning on Bluetooth on your phone helps the app discover the device faster.
• Put the Device in Pairing Mode: This is the most critical step. The smart device must be ready to receive network information.
• Pairing Mode Activation: This is usually done by pressing and holding the power/reset button for 5-10 seconds, or by turning the device ON and OFF three times consecutively (especially for smart bulbs).
• Visual Confirmation: The device’s LED indicator will typically be flashing rapidly or flashing slowly (the speed indicates which pairing method to use).
2. Connect the Device via the App
• Open the App: Launch the Tuya Smart or Smart Life app.
• Tap “Add Device”: On the home screen, tap the “+” button in the top right corner, or select “Add Device”.
Auto Discovery (Easiest Option):
The app will automatically scan for nearby devices ready for pairing (if Bluetooth is enabled). If your device appears, tap it to proceed directly to Step 6.
Manual Selection (If Auto Discovery Fails):
• Browse the list of device categories (e.g., Lighting, Camera, Sockets, etc.).
• Select your specific device type (e.g., Lighting – Light Source (Wi-Fi)).
Confirm Pairing Mode:
• The app will ask you to confirm that the indicator is flashing rapidly (Fast Blinking) or slowly (Slow Blinking). Select the correct state you see on your device.
• Enter Wi-Fi Details:
• The app will show the name of the Wi-Fi network your phone is connected to.
• Enter the password for this network.
Important: Do not change the network name (SSID) unless you are sure the device should connect to a different one.
Wait for Connection:
• Tap “Next”. The app will start sending the network information to the device.
• This usually takes 30 seconds to one minute.
• Success: When the connection is complete, the indicator light will stop flashing, and you will see a “Successfully Added” screen.
• Name the Device: Give your device a clear name (e.g., “Living Room Lamp,” “Front Door Camera”).
